Phone Back Clip Rfid Reader

The H100 ultra-high frequency RFID back clip is equipped with a third-generation reader chip, with a maximum transmission power of 33dBm and a receiving sensitivity of<-84dBm. Combined with a 3.5dBic circularly polarized antenna, it achieves a reading rate of 500+tags per second and a reading range of over 10 meters. Adopting a 4500mAh standard packaged battery (INR21700 model), users can replace the standard battery themselves to ensure long-term battery life. Optional options include Zebra E4107 and New World N1 2D bar dock to meet diverse scanning needs. The LED status indicator is clear at a glance, allowing real-time monitoring of battery level, Bluetooth RFID, and barcode scanning status.

HT100 Phone Back Clip Rfid Reader Specifications

1. Physical parameters

① Overall dimensions: 174.6mm × 80.5mm × 135mm

② Whole machine weight:<750g (depending on equipment functional configuration)

③ Battery capacity: 4500mAh standard packaged battery (INR21700 model), customers can purchase standard batteries for replacement by themselves

④ LED indicator: battery level, Bluetooth connection status, RFID reading and writing indicator, barcode scanning indicator

⑤ Communication interface: BLE5.0 Bluetooth interface, USB 2.0 HID driver free interface

⑥ Side buttons: Bluetooth on/off button, power on/off button, power+button, power - button

2. Barcode scanning

① 2D engine: optional Zebra E4107 and New World N1 2D bar dock

② Support one-dimensional: UPC/EAN,Code128,Code39,Code93, Code11 Interleaved 2 of 5,Discrete 2 of 5

③ Barcode type: USPS Planet,USPS Postnet,China Post, Korea Post,Australian Postal,Japan Postal,Dutch Postal(KIX),Royal Mail,Canadian Customs wait

④ Supports 2D: PDF417,MicroPDF417,Composite, RSS,TLC- 39,Datamatrix,QR code,Micro QR code, Aztec,MaxiCode,HanXin wait

3 UHF RFID

① Engine: Guoxin Third Generation X3M1 Chip

② Frequency: 920-925MHz/902-928MHz/865-868MHz

③ Air interface standard: default supports ISO18000-6B&6C, optional supports GB/T29768, GJB7377.1

④ Antenna parameters: circularly polarized antenna (3.5dBi)

⑤ Working distance:>10 meters (specific distance depends on the label)

⑥ Group reading speed:>500 tags per second (circularly polarized)

⑦ Transmission power: 33dBm

⑧ Output power regulation: 1 dB step

⑨ Receiver sensitivity: ≤ -84dBm

4. Protection standards

① Protection level: IP32

② Drop specification: Within the operating temperature, all 6 sides can withstand a drop of 1.2 meters from a height

③ Rolling test: 0.5m continuous rolling, stable even after rolling on 6 contact surfaces

5. Working environment

① Working temperature: -20 ℃~+70 ℃

② Storage temperature: -40 ℃ to+85 ℃

③ Working humidity: 10% to 95% RH without condensation

HT100 Phone Back Clip Rfid Reader Function button/indicator light description

1. Power button:

① Under normal shutdown/startup conditions, press and hold the power button on the bottom right side for two seconds

You will hear a beep from the buzzer, and then release the power button to turn on/off normally.

② When the H1 device does not engage in any data exchange for five minutes, it will automatically enter sleep mode with a power consumption of only microamperes. To start up normally, simply press the power button for more than 20ms, hear the buzzer sound once, and release the button to start up normally.

③ In normal operation, when the battery indicator light goes out, short press the power button for more than 20ms to turn on the battery indicator light.

2. Bluetooth switch: Short press the Bluetooth switch for more than 500ms, the buzzer will beep briefly and Bluetooth will be turned on/off.

3. Battery indicator light:

① In charging state, green light indicates that the battery is fully charged, and yellow light indicates that it is charging

② During normal use, a green light indicates a battery level greater than 3%, while a yellow light indicates a battery level less than 3%.

4. Bluetooth display light:

① Blinking indicates that Bluetooth is turned on but not connected;

② Constant light indicates that Bluetooth is turned on and connected;

③ Turning off indicates that Bluetooth is not turned on.

5. QR code scanning trigger: Long press to maintain QR code scanning, release to exit QR code scanning.

6. Card reading/stop trigger: Short press for more than 20ms to start/stop inventory.

7. Power+button: When the power does not reach the maximum value, short press for more than 20ms to increase

1 dB power, short flashing green indicator light and short beeping buzzer; When the power has reached its maximum value, short pressing for more than 20ms will not increase the power value, but will sound the buzzer at a fixed frequency and flash the red light at a fixed time.

8. Power button: When the power does not reach the minimum value, short press for more than 20ms to reduce it

1 dB power, short flashing green indicator light and short beeping buzzer; When the power has reached the minimum value, short pressing for more than 20ms will not reduce the power value, and the buzzer will sound at a fixed frequency and flash the red light at a fixed time.

HT100 Phone Back Clip Rfid Reader Common knowledge of safety maintenance

If used frequently, it can maintain the optimal movement state of the electrons in the battery cell. If not used for a long time, please charge 50% of the battery and store it.

If not used frequently, please remember to charge and discharge the product every three months.

Any product must be used correctly in a safe environment, especially electronic products, and attention must be paid to safe electricity usage.

When you find that the battery level display is not accurate, please press the cycle of fully charged, fully discharged, fully discharged, and then charged again.

Shipping & Transaction Policy

Welcome to LQYCIT. To ensure a smooth and transparent purchasing experience for our global industrial clients, we have outlined our standard policies regarding transactions, samples, and logistics below.

1. Payment & Transaction Terms

We strive to provide secure and flexible payment options for international trade:

Accepted Currencies: Primarily USD and EUR. Other major currencies may be accepted upon request.

Payment Methods: We accept Wire Transfer (T/T), PayPal, Credit Cards (Visa/Mastercard), and Alibaba Trade Assurance.

Security: All online transactions are processed through encrypted gateways to ensure your financial data is protected.

Order Processing: Orders are officially processed once the full payment or the agreed-upon deposit (for bulk orders) is confirmed.

2. Sample Policy for Evaluation

We recognize that industrial projects require rigorous hardware and software validation before bulk deployment.

Sample Orders: Clients can purchase individual units (e.g., HT600 PDA or Y100 Rugged Tablet) at a sample price for testing and evaluation.

Sample Refund Program: If a bulk order of over 100 units (or a specific contract value) is placed within 3 months of receiving the sample, the price difference of the sample unit will be credited toward your bulk order.

Technical Support: Sample units include access to our SDK documentation and remote technical support from our engineers to assist with software integration.

3. Shipping & Logistics

We ship from our headquarters in Shenzhen/Hong Kong, China to over 200 countries worldwide.

Global Carriers: We primarily use DHL, FedEx, and UPS for express door-to-door delivery. Air and sea freight options are available for high-volume shipments.

Estimated Lead Times:

Standard Stock Items: Dispatched within 1-3 business days.

Small-scale Customization: Dispatched within 7-15 business days.

Bulk OEM/ODM Orders: Typically 25-35 business days, depending on the project complexity.

Industrial-Grade Packaging: All devices are packed in customized anti-static, shockproof composite packaging to ensure they arrive in perfect condition despite long-distance transit.

4. Tracking & Delivery (Incoterms)

Order Tracking: A tracking number will be provided via email within 24 hours of shipment.

Incoterms: Our standard shipping terms are DAP (Delivered at Place) or EXW (Ex Works). If you require FOB or other specific terms, please consult our sales representatives before placing your order.

5. Customs, Duties & Taxes

Buyer's Responsibility: Please note that product prices and shipping costs do not include import duties, Value Added Tax (VAT), or consumption taxes in the destination country. These charges are the responsibility of the consignee (buyer).

Documentation: We provide professional Commercial Invoices, Packing Lists, and necessary certificates (e.g., CE, FCC) to ensure a smooth customs clearance process.

6. Damages & Force Majeure

Inspection: Please inspect the parcel upon arrival. If the external packaging is visibly damaged, please take photos and contact us within 48 hours to initiate a claim with the carrier.

Delays: While we strive for on-time delivery, we are not liable for delays caused by force majeure, including customs inspections, extreme weather, or international logistics strikes.